Paver Sealing
in Long Island, NY
Protect and Enrich Your Long Island
Paver Patios and Walkways
Long Island’s coastal moisture and four-season freeze-thaw cycles are hard on paver hardscapes. Moisture drives organic growth into the joints, sand washes out over time, and without protection the surface fades and weakens season by season. The region has significant high-end paver patios, walkways, and pool surrounds, and sealing is what keeps them looking and performing the way they should. A proper seal hardens the joints, protects the color, and gives the surface a barrier against everything the Long Island climate throws at it.
We seal pavers to harden the joints and protect the surface, in a Natural, Semi-Gloss, or High-Gloss finish, using Alliance Gator and Trident manufacturer sealants. Here at Squeaky Clean Property Solutions, we have been doing this work across Long Island for nearly two decades. Whether you need to protect a new paver installation or restore one that has started to fade, we match the finish to the surface and apply it to spec.
Call us for a free estimate at (631) 387-2156.
The Paver Sealing Finishes We Offer
We seal pavers in three finishes so you choose the look you want. During the estimate, we help you land on the one that fits your space and how the pavers are used.
Natural Finish
A color-enhancing finish that deepens the pavers’ natural color without a wet, glassy look. It hardens the joints, repels moisture, and enriches the tone while keeping the surface looking like pavers, not polished tile. This is a finish we often steer homeowners toward because it holds up well underfoot and still brings out the color you chose the paver for in the first place.
Semi-Gloss
A step up in sheen from natural. Semi-gloss adds a subtle, color-enhancing shine that still reads as understated. It is the other finish we commonly recommend for patios and walkways where homeowners want a visible richness without the full wet-look. The sheen is noticeable but not glossy, and the surface stays comfortable and safe underfoot.
High Gloss
The wet-look finish. High gloss delivers the highest sheen and the richest color pop of the three options. A high-gloss wet-look can get slippery when wet, which is why we usually point homeowners toward a Natural or Semi-Gloss finish. We discuss this honestly at the estimate and typically recommend high gloss only for covered areas, decorative accents, or surfaces with limited wet foot traffic. For open patios and pool surrounds, Natural or Semi-Gloss is the safer call.
Why Long Island Homeowners
Choose Us for Paver Sealing
Four reasons homeowners across Long Island trust us with their pavers.
Over Two Million Square Feet of Pavers Sealed
We have sealed well over two million square feet of pavers, so we know how a paver takes a sealer and which finish lasts. That volume means we have spent years reading the surface, matching the finish to the material, and getting an even, lasting seal on every job.
We Seal With Manufacturer Products, Not a Generic Coating
We seal with Alliance Gator and Trident sealants, not an off-the-shelf generic sealer. Why it matters: the seal is matched to the paver and backed to manufacturer specification, which means the product performs the way it was formulated to. The same products and process also apply to concrete sealing projects.
Full-Service Paver Restoration, Not Just Sealing
Sealing is one step of the paver restoration we do end to end. The same crew that seals your pavers can also clean them and re-sand the joints when they need it, so you deal with one team for the whole patio. That also means one estimate, one schedule, and one point of accountability for the entire job.
Over Two Decades of Long Island Paver Work
We have been sealing paver patios and walkways across Long Island since 2006. Twenty years of knowing how the local climate treats a sealed surface and which finish holds up is what keeps our work looking right years later. As a locally-owned Long Island company, our reputation depends on what the pavers look like long after the crew leaves.
How Our
Paver Sealing Process Works
The Free Written Estimate
Call us or reach out online and an office manager takes the details within a half hour or less. The team measures the pavers and scopes the finish so the quote is exact. Estimates are a mix of in-person and photo-based, depending on the job. An exact written quote is in your hands within 24 hours.
Scheduling and the Pre-Service Heads-Up
Once booked, you get a pre-service reminder sequence: a heads-up roughly two days out, the day before, day-of, and an “on the way” notice. Sealing needs a dry day, so weather is factored into the date. If heavy rain threatens, we reschedule to a better day.
Surface Check
Before any sealant goes down, we confirm the paver surface is dry, clean, and free of rust and efflorescence. Sealing traps whatever is on the surface, so this check protects the result. If the pavers need cleaning first, that is addressed as part of the scope or as a separate paver cleaning. Rust removal is handled as a standalone service when rust staining is present.
Applying Your Chosen Finish
We apply the chosen finish using Alliance Gator and Trident sealants. Whether it is Natural, Semi-Gloss, or High Gloss, the finish choice is confirmed before we start and the product is applied at the manufacturer’s coverage rate.
Cure and Dry Time
The seal goes down in a day, then needs 24 to 48 hours of dry time before the surface is back in use. We tell you the window so nobody walks or sets furniture on it too soon.
Walkthrough and Invoice
We walk the finished pavers with you if you are home and send before-and-after photos. Photo documentation is standard on every job. The invoice follows once you have looked at the work and you are satisfied.
Paver Sealing Pricing
in Long Island
Paver sealing is priced per square foot and starts at $500, with the final figure driven by the size of the area and the finish you choose. The crew measures the pavers and factors in the square footage, finish selection, and accessibility before quoting. Higher-sheen finishes carry a higher material cost, and larger paver areas bring the per-square-foot price down. You will know the exact cost before any work begins, and the estimate is free with no obligation.
- Paver Sealing starts at $500. Priced per square foot. The starting figure scales with the square footage of the pavers and the finish selected (Natural, Semi-Gloss, or High Gloss). Sealed in a day with 24 to 48 hours of dry time before the surface goes back into use.
- Bundle discount: adding paver sealing to other paver work, or sealing as part of a full paver restoration (clean, re-sand, seal), earns a discounted price. Many homeowners pair sealing with cleaning and resanding for the best result, and the bundle is priced as one scope rather than three separate jobs. Ask when you get your estimate.
Our Paver Sealing Guarantee
Manufacturer-Spec Warranty
Our paver and sealing work is done to manufacturer specification and backed accordingly. The seal is applied to Alliance Gator and Trident manufacturer spec, and the warranty traces to how the work was performed. That means the product, the coverage rate, and the application method all meet the standard the manufacturer set.
100% Satisfaction
100% satisfaction guaranteed. If you’re not happy with the result, we’ll come back out, take a look, and make it right. On any concern, the team inspects within a half hour of your call and, if valid, corrects the issue. The invoice follows satisfaction, not the other way around.
Paver Sealing FAQs
Which paver sealing finish should I choose, and is the high-gloss one slippery?
We offer three finishes: Natural, Semi-Gloss, and High Gloss. We help you match the look to your space during the estimate. A high-gloss wet-look finish can get slippery when wet, so we tend to steer homeowners toward a color-enhancing Natural or Semi-Gloss finish. Both Natural and Semi-Gloss enrich the pavers’ color without the slip risk. High Gloss gives the richest wet-look but is the one to think twice about on wet, walked-on surfaces like pool surrounds and steps.
How long before I can walk on or use my sealed pavers?
The pavers are sealed in a day, then need 24 to 48 hours of dry time before the surface goes back into use. Plan to keep foot traffic, furniture, and pets off the pavers during that window so the finish sets properly. Sealing also needs a dry day to apply, which we factor into scheduling.
Get Your Free Paver Sealing Quote on Long Island
Your Long Island paver patios and walkways are worth protecting, and the right finish applied to manufacturer spec is what makes the seal last. Call us for a free, exact written estimate with no obligation. First response is within a half hour, and the quote is in your hands within 24 hours. Whether you need standalone sealing or the full restoration treatment, we will walk you through every option. Long Island homeowners can reach us at (631) 387-2156.